• ASTM A135/A135M-19

ASTM A135/A135M-19

  • Standard Specification for Electric-Resistance-Welded Steel Pipe
  • standard by ASTM International, 05/01/2019
  • Category: ASTM

$48.00 $24.00

1.1 This specification2 covers two grades of electric-resistance-welded steel pipe in NPS 2 to NPS 30 [DN 50 to DN 750] inclusive, with nominal (average) wall thickness up to 0.500 in. [12.70 mm], inclusive, and in nominal sizes NPS ³/4 to NPS 5 [DN 20 to DN 125] inclusive with nominal (average) wall thickness 0.083 in. [2.11 mm] to 0.134 in. [3.40 mm], depending on size. Pipe having other dimensions (Note 1) may be furnished provided such pipe complies with all other requirements of this specification. The pipe is intended for conveying gas, vapor, water or other liquid; only Grade A is adapted for flanging and bending (Note 2). The suitability of pipe for various purposes is somewhat dependent upon its dimensions, properties, and conditions of service, so that the purpose for which the pipe is intended should be stated in the order. The pipe may be furnished either nonexpanded or cold expanded at the option of the manufacturer. When pipe is cold expanded, the amount of expansion shall not exceed 1.5 % of the outside diameter pipe size.

Note 1: A comprehensive listing of standardized pipe dimensions is contained in ASME B36.10M.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

ASTM F2050-16

ASTM F2050-16

Standard Consumer Safety Specification for Hand-Held Infant Carriers..

$24.00 $48.00

ASTM D5072-09(2016)

ASTM D5072-09(2016)

Standard Test Method for Radon in Drinking Water..

$24.00 $48.00

ASTM D5608-16

ASTM D5608-16

Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low L..

$24.00 $48.00

ASTM E3050-16

ASTM E3050-16

Standard Specification for Denatured Ethanol for Use as Cooking and Appliance Fuel..

$21.00 $42.00