• ASTM A312/A312M-15a

ASTM A312/A312M-15a

  • Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
  • standard by ASTM International, 09/01/2015
  • Category: ASTM

$65.00 $33.00

1.1 This specification2 covers seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service.

Note 1: When the impact test criterion for a low-temperature service would be 15 ft·lbf [20 J] energy absorption or 15 mils [0.38 mm] lateral expansion, some of the austenitic stainless steel grades covered by this specification are accepted by certain pressure vessel or piping codes without the necessity of making the actual test. For example, Grades TP304, TP304L, and TP347 are accepted by the ASME Pressure Vessel Code, Section VIII Division 1, and by the Chemical Plant and Refinery Piping Code, ANSI B31.3, for service at temperatures as low as −425 °F [−250 °C] without qualification by impact tests. Other AISI stainless steel grades are usually accepted for service temperatures as low as −325 °F [−200 °C] without impact testing. Impact testing may, under certain circumstances, be required. For example, materials with chromium or nickel content outside the AISI ranges, and for material with carbon content exceeding 0.10 %, are required to be impact tested under the rules of ASME Section VIII Division 1 when service temperatures are lower than −50 °F [−45 °C].

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

ASTM D2070-16e1

ASTM D2070-16e1

Standard Test Method for Thermal Stability of Hydraulic Oils..

$24.00 $48.00

ASTM C1740-16

ASTM C1740-16

Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method..

$24.00 $48.00

ASTM D7751-16

ASTM D7751-16

Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis..

$24.00 $48.00

ASTM D7775-16

ASTM D7775-16

Standard Guide for Measurements on Small Graphite Specimens..

$24.00 $48.00