• ASTM A814/A814M-15(2019)

ASTM A814/A814M-15(2019)

  • Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
  • standard by ASTM International, 03/01/2019
  • Category: ASTM

$48.00 $24.00

1.1 This specification covers two classes of flanged and cold-bending quality cold-worked straight-seam single or double welded austenitic steel pipe intended for high-temperature and general corrosive services.

Note 1: When the impact test criterion for a low-temperature service would be 15 ft·lbf [20 J] energy absorption or 15 mils [0.38 mm] lateral expansion, some of the austenitic stainless steel grades covered by this specification are accepted by certain pressure vessel or piping codes without the necessity of making the actual test. For example, Grades 304, 304L, and 347 are accepted by the ASME Pressure Vessel Code, Section VIII Division 1, and by the Chemical Plant and Refinery Piping Code, ANSI B31.3 for service at temperatures as low as −425 °F [−250 °C] without qualification by impact tests. Other AISI stainless steel grades are usually accepted for service temperatures as low as −325 °F [−200 °C] without impact testing. Impact testing may, under certain circumstances, be required. For example, materials with chromium or nickel content outside the AISI ranges, and for material with carbon content exceeding 0.10 %, are required to be impact tested under the rules of ASME Section VIII Division 1 when service temperatures are lower than −50 °F [−45 °C].

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

ASTM C1246-17

ASTM C1246-17

Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric..

$21.00 $42.00

ASTM C1795-17

ASTM C1795-17

Standard Test Methods for High-Temperature Characterization of Gypsum Boards and Panels..

$24.00 $48.00

ASTM D5322-17

ASTM D5322-17

Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geos..

$21.00 $42.00

ASTM D6389-17

ASTM D6389-17

Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids..

$21.00 $42.00