• ASTM B491/B491M-15

ASTM B491/B491M-15

  • Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
  • standard by ASTM International, 01/01/2015
  • Category: ASTM

$48.00 $24.00

1.1 This specification covers aluminum and aluminum-alloy extruded round tubes either in coils or straight lengths, for general purpose applications such as refrigeration service, gas lines, oil lines, and instrument lines, in the alloys (Note 2) and tempers shown in Table 2 [Table 3], in outside diameters of 0.250 through 0.750 in. [6.00 through 20.00 mm]. For diameters over 0.500 through 0.750 in. [over 12.50 through 20.00 mm], the diameter and wall-thickness tolerances and eddy-current test parameters, if required, shall be agreed upon by the producer and the purchaser. Only tubes in aluminum 1200-H111 and 1235-H111 are sized after extrusion to minimize ovalness.

(A) Limits are in percent maximum unless shown as a range or otherwise stated.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

ASTM D3856-11(2015)

ASTM D3856-11(2015)

Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water..

$27.00 $54.00

ASTM D5172-91(2015)

ASTM D5172-91(2015)

Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water..

$21.00 $42.00

ASTM D5411-10(2015)

ASTM D5411-10(2015)

Standard Practice for Calculation of Average Energy Per Disintegration (¯E) for a Mixture of Ra..

$24.00 $48.00

ASTM D5810-96(2015)

ASTM D5810-96(2015)

Standard Guide for Spiking into Aqueous Samples ..

$24.00 $48.00