ASTM D129-18
- Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)
- standard by ASTM International, 04/01/2018
- Category: ASTM
$48.00
$24.00
1.1 This test method covers the determination of sulfur in petroleum products, including lubricating oils containing additives, additive concentrates, and lubricating greases that cannot be burned completely in a wick lamp. The test method is applicable to any petroleum product sufficiently low in volatility that it can be weighed accurately in an open sample boat and containing at least 0.1 % sulfur.
Note 1: This test method is not applicable to samples containing elements that give residues, other than barium sulfate, which are insoluble in dilute hydrochloric acid and would interfere in the precipitation step. These interfering elements include iron, aluminum, calcium, silicon, and lead which are sometimes present in greases, lube oil additives, or additive oils. Other acid insoluble materials that interfere are silica, molybdenum disulfide, asbestos, mica, and so forth. The test method is not applicable to used oils containing wear metals, and lead or silicates from contamination. Samples that are excluded can be analyzed by Test Method D1552.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
ASTM E1796-03(2016)
Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Bu..
$24.00 $48.00
ASTM E2120-10(2016)
Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the..
$24.00 $48.00
ASTM C926-16a
Standard Specification for Application of Portland Cement-Based Plaster..
$33.00 $65.00
