• ASTM D3900-17

ASTM D3900-17

  • Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylen
  • standard by ASTM International, 10/01/2017
  • Category: ASTM

$54.00 $27.00

1.1 These test methods cover the determination of the proportion of ethylene and propylene units in ethylene-propylene copolymers (EPM) and ethylene-propylenediene terpolymers (EPDM) over the range from 35 to 85 mass % ethylene. Four test methods are needed to encompass the variety of commercial polymers that contain additives or polymerized diene units that interfere with the various infrared peaks. Except when interferences are present, all four test methods should give similar results. The test methods appear in the following order:

1.1.1 Pressed Film Test Methods:

 

 Sections

Test Method A-For EPM and EPDM between 35 and 70 mass % ethylene

 9 - 14

Test Method B-For EPM and EPDM between 60 and 85 mass % ethylene, except for ethylene/propylene/1,4-hexadiene terpolymers

15 - 19

Test Method C-For all EPM and EPDM polymers between 35 and 85 mass % ethylene, using near infrared

20 - 24

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

ASTM D4443-19

ASTM D4443-19

Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl C..

$21.00 $42.00

ASTM D5577-19

ASTM D5577-19

Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics..

$24.00 $48.00

ASTM D6339-11(2019)

ASTM D6339-11(2019)

Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding..

$24.00 $48.00

ASTM D7132-19

ASTM D7132-19

Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam..

$24.00 $48.00