• ASTM D4294-16

ASTM D4294-16

  • Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • standard by ASTM International, 01/01/2016
  • Category: ASTM

$58.00 $29.00

1.1 This test method covers the determination of total sulfur in petroleum and petroleum products that are single-phase and either liquid at ambient conditions, liquefiable with moderate heat, or soluble in hydrocarbon solvents. These materials can include diesel fuel, jet fuel, kerosine, other distillate oil, naphtha, residual oil, lubricating base oil, hydraulic oil, crude oil, unleaded gasoline, gasoline-ethanol blends, biodiesel (see Note 2), and similar petroleum products.

Note 1: Oxygenated fuels with ethanol or methanol contents exceeding the limits given in Table 1 can be dealt with using this test method, but the precision and bias statements do not apply (see Appendix X3).

(A) The concentrations of substances in this table were determined by the calculation of the sum of the mass absorption coefficients times mass fraction of each element present. This calculation was made for dilutions of representative samples containing approximately 3 % of interfering substances and 0.5 % sulfur.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

ASTM D198-15

ASTM D198-15

Standard Test Methods of Static Tests of Lumber in Structural Sizes..

$35.00 $69.00

ASTM D2227-96(2015)

ASTM D2227-96(2015)

Standard Specification for Natural Rubber (NR) Technical Grades..

$21.00 $42.00

ASTM D2449-88(2015)

ASTM D2449-88(2015)

Standard Specification for Rubber Bales From Natural Sources-Limit on Coating..

$21.00 $42.00

ASTM F1941/F1941M-15

ASTM F1941/F1941M-15

Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric..

$33.00 $65.00