ASTM D4541-17
- Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
- standard by ASTM International, 08/01/2017
- Category: ASTM
$54.00
$27.00
1.1 This test method covers a procedure for evaluating the pull-off strength (commonly referred to as adhesion) of a coating system from metal substrates. Pull-off strength of coatings from concrete is described in Test Method D7234. This test offers two test protocols. Protocol 1 (test to fracture) determines the greatest perpendicular force (in tension) that a surface area can bear before a plug of material is detached. Protocol 2 (pass/fail) determines if the coated surface remains intact at a defined load criteria. Fracture will occur along the weakest plane within the system comprised of the test fixture, glue, coating system, and substrate, and will be exposed by the fracture surface. This test method maximizes tensile stress as compared to the shear stress applied by other methods, such as scratch or knife adhesion, and results may not be comparable.
Note 1: The procedure in this standard was developed for metal substrates, but may be appropriate for other rigid substrates such as plastic and wood. Factors such as loading rate and flexibility of the substrate must be addressed by the user/specifier.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
ASTM D4922-09(2016)e1
Standard Test Method for Determination of Radioactive Iron in Water..
$24.00 $48.00
ASTM D5153-10(2016)
Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption..
$21.00 $42.00
ASTM E1268-01(2016)
Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures..
$42.00 $83.00
ASTM D5611-94(2016)
Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application..
$24.00 $48.00