ASTM D6744-06(2017)e1
- Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
- standard by ASTM International, 01/01/2017
- Category: ASTM
$48.00
$24.00
1.1 This test method covers a steady-state technique for the determination of the thermal conductivity of carbon materials in thicknesses of less than 25 mm. The test method is useful for homogeneous materials having a thermal conductivity in the approximate range 1< λ < 30 W/(m·K), (thermal resistance in the range from 10 to 400 × 10−4 m2 ·K/W) over the approximate temperature range from 150 K to 600 K. It can be used outside these ranges with reduced accuracy for thicker specimens and for thermal conductivity values up to 60 W/(m·K).
Note 1: It is not recommended to test graphite cathode materials using this test method. Graphites usually have a very low thermal resistance, and the interfaces between the specimen to be tested and the instrument become more significant than the specimen itself.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
ASTM D2860/D2860M-18
Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Con..
$24.00 $48.00
ASTM C1709-18
Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in ..
$21.00 $42.00
ASTM D748-18
Standard Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectr..
$24.00 $48.00
ASTM E967-18
Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Different..
$24.00 $48.00