• ASTM D7616/D7616M-11(2017)

ASTM D7616/D7616M-11(2017)

  • Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Ma
  • standard by ASTM International, 08/01/2017
  • Category: ASTM

$48.00 $24.00

1.1 This test method describes the requirements for sample preparation and tensile testing of single-lap shear splices formed with fiber-reinforced polymer (FRP) composite materials commonly used for strengthening of structures made of materials such as metals, timber, masonry, and reinforced concrete. The objective of this method is to determine the apparent shear strength of an overlap splice joint through the application of a far-field tensile force. The method applies to wet lay-up FRP material systems fabricated on site or in a laboratory setting. The FRP composite may be of either unidirectional (0°) or cross-ply (0/90 type) reinforcement. For cross-ply laminates, the construction may be achieved using multiple-layers of unidirectional fibers at either 0 or 90°, or one or more layers of stitched or woven 0/90 fabrics. The composite material forms are limited to continuous fiber or discontinuous fiber-reinforced composites in which the laminate is balanced and symmetric with respect to the test direction. The method is often used to determine the length of the overlap splice needed to ensure that a tension failure occurs in the material away from the splice rather than the splice connection itself.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

ASTM F3188-16

ASTM F3188-16

Standard Specification for Extractable Hazardous Metals in Synthetic Turf Infill Materials..

$21.00 $42.00

ASTM C134-95(2016)

ASTM C134-95(2016)

Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and I..

$21.00 $42.00

ASTM C1407-98(2016)

ASTM C1407-98(2016)

Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes..

$21.00 $42.00

ASTM C1542/C1542M-16a

ASTM C1542/C1542M-16a

Standard Test Method for Measuring Length of Concrete Cores..

$21.00 $42.00