• ASTM F1807-17

ASTM F1807-17

  • Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing a
  • standard by ASTM International, 02/01/2017
  • Category: ASTM

$58.00 $29.00

1.1 This specification covers metal insert fittings and copper crimp rings for use with cross-linked polyethylene (PEX) tubing in ³/8 , 1/2 , 5/8 , ³/4 , 1, 1 1/4 , 11/2 , and 2 in. nominal diameters that meet the requirements for Specification F876 and for use with polyethylene of raised temperature (PE-RT) tubing in ³/8 , 1/2 , 5/8 , ³/4 and 1 in. and 1 1/4 in. nominal diameters that meet the requirements of Specifications F2623 and F2769. These fittings are intended for use in 100 psi (689.5 kPa) cold- and hot-water distribution systems operating at temperatures up to, and including, 180°F (82°C). In addition, the fittings covered by this specification are intended for use in, but not limited to, residential and commercial systems, reclaimed water, fire protection, municipal water service lines, radiant heating and cooling systems, hydronic distribution systems, snow and ice melting systems, geothermal ground loops, district heating, turf conditioning, compressed air distribution and building services pipe. The requirements for materials, workmanship, dimensions, and markings to be used on the fittings and rings are also included.

Note 1: Other code and regulatory requirements may apply to fittings for specific applications.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

ASTM D7522/D7522M-15

ASTM D7522/D7522M-15

Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete Substrate..

$24.00 $48.00

ASTM D7621-15

ASTM D7621-15

Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extrac..

$33.00 $65.00

ASTM E488/E488M-15

ASTM E488/E488M-15

Standard Test Methods for Strength of Anchors in Concrete Elements..

$33.00 $65.00

ASTM D4106-15

ASTM D4106-15

Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficie..

$24.00 $48.00