• ICC IBC-2018

ICC IBC-2018

  • 2018 International Building Code
  • standard by International Code Council, 2017
  • Category: ICC

$143.00 $72.00

The scope of the International Building Code® (IBC®) includes all buildings except detached one- and two-family dwellings and townhouses up to three stories.
The 2018 IBC contains many important changes such as:
  • Accessory storage spaces of any size are now permitted to be classified as part of the occupancy to which they are accessory.
  • New code sections have been introduced addressing medical gas systems and higher education laboratories.
  • Use of fire walls to create separate buildings is now limited to only the determination of permissible types of construction based on allowable building area and height.
  • Where an elevator hoistway door opens into a fire-resistance-rated corridor, the opening must be protected in a manner to address smoke intrusion into the hoistway.
  • The occupant load factor for business uses has been revised to one occupant per 150 square feet.
  • Live loads on decks and balconies increase the deck live load to one and one-half times the live load of the area served.
  • The minimum lateral load that fire walls are required to resist is five pounds per square foot.
  • Wind speed maps updated, including maps for the state of Hawaii. Terminology describing wind speeds has changed again with ultimate design wind speeds now called basic design wind speeds.
  • Site soil coefficients now correspond to the newest generation of ground motion attenuation equations (seismic values).
  • Five-foot tall wood trusses requiring permanent bracing must have a periodic special inspection to verify that the required bracing has been installed.
  • New alternative fastener schedule for construction of mechanically laminated decking is added giving equivalent power-driven fasteners for the 20-penny nail.
  • Solid sawn lumber header and girder spans for the exterior bearing walls reduce span lengths to allow #2 Southern Pine design values.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS1560B

SAE AS1560B

Modules and Basic Racks of Metric Spur and Helical Gears (Stabilized: Sep 2018)..

$41.00 $81.00

SAE AS177C

SAE AS177C

Operating Instructions for Aircraft Engines (Preparation of) (Stabilized: Sep 2018)..

$41.00 $81.00

SAE AS34591C

SAE AS34591C

CONNECTOR, PLUG, ELECTRICAL, SELF-LOCKING, COUPLING NUT, REAR RELEASE, CRIMP CONTACT, AN TYPE..

$41.00 $81.00

SAE J153_201809

SAE J153_201809

Operator Precautions..

$41.00 $81.00