• IEEE 1018-1985

IEEE 1018-1985

  • IEEE Recommended Practice for Specifying Electric Submersible Pump Cable-Ethylene Propylene Rubber Insulation
  • standard by IEEE, 12/18/1984
  • Category: IEEE

$49.00 $25.00

New IEEE Standard - Superseded.This recommended practice establishes requirements for a three-conductor round-type oil-well cable used in supplying three-phase ac electric power to submersible pump motors. Cables meeting the requirements of the recommended practice shall be rated for voltages not exceeding 3 kV or 5 kV and for ambient temperatures not exceeding 257 F (125 C). Use of cable above rated temperature can cause premature deterioration of the insulation. Voltage ratings are nominal phase-to-phase ratings.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5657C

SAE AMS5657C

Steel Bars and Forgings, Corrosion and Moderate Heat-Resistant 15Cr - 7.1Ni - 2.5Mo - 1.1Al..

$41.00 $81.00

SAE AMS5649G

SAE AMS5649G

Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 18Cr - 13Ni - 2.1Mo Free Machining Sol..

$41.00 $81.00

SAE AMS5651J

SAE AMS5651J

Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 25Cr - 20Ni (SAE 30310)..

$41.00 $81.00

SAE AMS5686G

SAE AMS5686G

Steel, Corrosion Resistant, Rivet Wire, 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated..

$41.00 $81.00