• IEEE 142-1982

IEEE 142-1982

  • IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems (IEEE Green Book)
  • standard by IEEE, 09/17/1982
  • Category: IEEE

$74.00 $37.00

New IEEE Standard - Superseded.The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered. The advantages and disadvantages of grounded versus ungrounded systems are discussed. Information is given on how to ground the system, where the system should be grounded, and how to select equipment for the grounding of the neutral circuits. Connecting the frames and enclosures of electric apparatus, such as motors, switchgear, transformers, buses, cables conduits, building frames, and portable equipment, to a ground system is addressed. The fundamentals of making the interconnection or ground-conductor system between electric equipment and the ground rods, water pipes, etc. are outlined. The problems of static electricity¿¿¿how it is generated, what processes may produce it, how it is measured, and what should be done to prevent its generation or to drain the static charges to earth to prevent sparking¿¿¿are treated. Methods of protecting structures against the effects of lightning are also covered. Obtaining a low-resistance connection to the earth, use of ground rods, connections to water pipes, etc. is discussed. A separate chapter on sensitive electronic equipment is included.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

NAS 1446 THRU 1452 Rev. 3

NAS 1446 THRU 1452 Rev. 3

Pin, Swage Locking, Steel, Standard and Oversize, Protruding Head, Shear, Pull-Type..

$27.00 $53.00

NAS 1456 THRU 1462 Rev. 3

NAS 1456 THRU 1462 Rev. 3

Pin, Swage Locking, Steel, Standard and Oversize, 100 Degrees Head (MS24694), Tension Pull-Type..

$27.00 $53.00

NAS 1716 Rev. 4

NAS 1716 Rev. 4

Clamp, Loop, Cushioned, Saddle..

$27.00 $53.00

NAS 1785 Rev. 3

NAS 1785 Rev. 3

Bolt, External Wrenching, 220 Ksi Min Tensile, 132 Ksi Min Shear H-11 Steel 900F..

$27.00 $53.00