• IEEE 1505-2010

IEEE 1505-2010

  • IEEE Standard for Receiver Fixture Interface
  • standard by IEEE, 11/15/2010
  • Category: IEEE

$142.00 $71.00

Revision Standard - Active.A mechanical and electrical specification for implementing a common interoperable mechanical quick-disconnect interconnect system for use by industry for interfacing large numbers of electrical signals (digital, analog, RF, power, etc.) is provided. These large interface panels (receiver and fixture panels) are employed primarily in test systems between stimulus/measurement assets and a related unit-under-test (UUT), although any application involving high-density contacts requiring a quick disconnect interface could benefit. The receiver is a receptacle that is mounted to test system mates with multiple fixtures, which serve as the buffer between the UUT and automatic test equipment (ATE). Fixtures translate standard input/output (I/O) signal routing offered at the receiver to a wiring interface that directly connects to the UUT. These UUT interfaces can represent cable connectors, direct plug-in (printed circuit board edge connectors), sensor monitoring, or manual feedback from the test technician. The primary objectives of this standard are: (a) to establish interface standards that permit interchangeability of mechanical/electrical receiver/fixture/connector product assemblies from various manufacturers under an open architecture; and (b) to develop within this framework a defined set(s) of interconnecting connector and mechanical specifications that supports available, accepted, low-cost commercial technology to reduced dependence on proprietary designs and extend life-cycle availability.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS6429J

SAE AMS6429J

Steel Bars, Forgings, Tubing, and Rings 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) Co..

$41.00 $81.00

SAE AMS6428L

SAE AMS6428L

Steel, Bars, Forgings, and Tubing 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 - 0.38C) (4335 Mod)..

$41.00 $81.00

SAE AS5377

SAE AS5377

Nut, Self-Locking, 0.7500 thru 1.5000 Thread Sizes, UNS S66286, 160,000 psi, 800 ¿¿F, UNJ Thread - P..

$41.00 $81.00

SAE AS9770

SAE AS9770

PACKING, PREFORMED ¿¿¿ AMS3650, ¿¿¿O¿¿¿ RING..

$41.00 $81.00