• IEEE 1547.7-2013

IEEE 1547.7-2013

  • IEEE Guide for Conducting Distribution Impact Studies for Distributed Resource Interconnection
  • standard by IEEE, 02/28/2014
  • Category: IEEE

$189.00 $95.00

New IEEE Standard - Active.IEEE Std 1547.7(TM) is part of the IEEE 1547(TM) series of standards. Whereas IEEE Std 1547(TM)-2003 provides mandatory requirements for the interconnection of distributed resources (DR) with electric power systems (EPS), this guide does not presume the interconnection is IEEE 1547(TM) compliant. Further, this guide does not interpret IEEE Std 1547(TM) or other standards in the IEEE 1547(TM) series, and this guide does not provide additional requirements or recommended practices related to the other IEEE 1547(TM) documents. However, DR interconnection may contribute to resultant conditions that could exceed what was normally planned for and built into the distribution system. This guide provides alternative approaches and good practices for engineering studies of the potential impacts of a DR or aggregate DR interconnected to the electric power distribution system. This guide describes criteria, scope, and extent for those engineering studies. Study scope and extent are described as functions of identifiable characteristics of the DR, the EPS, and the interconnection. The intent includes promoting impact study consistency while helping identify only those studies that should be performed based on technically transparent criteria for the DR interconnection.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2253_201707

SAE J2253_201707

Test Procedures for Automotive Structural Composite Materials (Stabilized: Jul 2017)..

$41.00 $81.00

SAE J2642_201707

SAE J2642_201707

Recommended Practice for Developing Specifications for Automotive Thermoplastic Materials (Stabilize..

$41.00 $81.00

SAE AS39029/55A

SAE AS39029/55A

CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-DTL-26500 AND MIL-DTL-265..

$41.00 $81.00

SAE J1717_201707

SAE J1717_201707

Interior Automotive Plastic Part Testing (Stabilized: Jul 2017)..

$41.00 $81.00