• IEEE 1727-2013/Cor 1-2015

IEEE 1727-2013/Cor 1-2015

  • IEEE Guide for Working Procedures on Underground Transmission Circuits with Induced Voltage -- Corrigendum 1
  • Corrigenda by IEEE, 02/20/2015
  • Category: IEEE

$185.00 $93.00

Corrigendum Standard - Active.Induced voltage working procedures for underground transmission circuits are established in this guide. A transmission circuit when de-energized will have an induced voltage when in a common duct bank with an energized circuit. The induced voltage may be a possible safety hazard. The induced voltage may be determined by modeling the circuits and by measurement. This guide addresses the working procedures to follow when performing work where induced voltage is present.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMSR25988A

SAE AMSR25988A

Rubber, Fluorosilicone Elastomer, Oil-and-Fuel-Resistant, Sheets, Strips, Molded Parts, and Extruded..

$41.00 $81.00

SAE AS5780C

SAE AS5780C

Specification for Aero and Aero-Derived Gas Turbine Engine Lubricants..

$41.00 $81.00

SAE AMS5315E

SAE AMS5315E

Ductile (Nodular) Iron Castings, Sand 60000 psi (415 MPa) Tensile Strength Ferritize Annealed (Stabi..

$41.00 $81.00

SAE AMS5316E

SAE AMS5316E

Ductile (Nodular) Iron Castings, Sand 80,000 psi (550 MPa) Tensile Strength As Cast (Stabilized: Aug..

$41.00 $81.00