• IEEE 269-1966

IEEE 269-1966

  • IEEE Proposed Method for Measuring Transmission Performance of Telephone Sets
  • standard by IEEE, 04/30/1966
  • Category: IEEE

$52.00 $26.00

- Superseded.The method requires a suitable Artificial Mouth. It also specifies a standard Artificial Ear, standard circuits comprising direct-current power feed and connecting loops, and a standard pressure microphone. 2.3 This Standard is intended for use in measuring the transmission characteristic over the frequency range most useful for speech, e.g. 150 to 5000 hertz. It is to be used for single-frequency measurements and for measurements with continuously varying frequencies such as slow sweeps and warble bands. 2.4 It is suitable also for measuring the transmission performance of conventional telephone sets equipped with handsets using carbon transmitters and used with 2-wire circuits. It is not intended to be applicable to special devices such as noise-exclusion transmitters, distant-talking transmitters, insert-type receivers, or noise-exclusion receivers equipped with large ear pads. 2.5 This Standard is based on a standard pressure microphone to measure the sound field produced by the Artificial Mouth and to measure the pressure developed in the Artificial Ear. 2.6 Drawings and test procedures as well as other pertinent information have been included as an aid to designers in setting up the tests.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5553H

SAE AMS5553H

Nickel, Sheet and Strip Low (0.02 max) Carbon Annealed..

$41.00 $81.00

SAE AMS7707E

SAE AMS7707E

Iron, Commercially Pure, Bar, Sheet, Strip, and Plate Hot Rolled, Unannealed..

$41.00 $81.00

SAE ARP7488

SAE ARP7488

Peening Design and Process Control Guidelines..

$41.00 $81.00

SAE AMS2819C

SAE AMS2819C

Identification, Welding Wire Direct Color Code System (Stabilized: Jan 2018)..

$41.00 $81.00