• IEEE 323-1983

IEEE 323-1983

  • IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations
  • standard by IEEE, 12/30/1983
  • Category: IEEE

$95.00 $48.00

Revision Standard - Superseded.The basic requirements for qualifying Class 1E equipment with interfaces that are to be used in nuclear power generating stations are described. The principles, procedures, and methods of qualification are covered. These qualification requirements, when met, will confirm the adequacy of the equipment design under normal, abnormal, design-basis-event, post-design-basis-event, and in-service test conditions for the performance of safety functions. The methods are to be used for qualifying equipment, extending qualification, and updating qualification if the equipment is modified.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS3374/4A

SAE AMS3374/4A

Sealing Compound Two-Part, Polysulfide (Type 4) Firewall Sealant..

$41.00 $81.00

SAE AMS4212K

SAE AMS4212K

Aluminum Alloy Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated..

$41.00 $81.00

SAE AMS4229E

SAE AMS4229E

Aluminum Alloy Castings, High Strength 4.5Cu 0.70Ag 0.30Mn 0.25Mg 0.25Ti (A201.0-T7) Solution Heat T..

$41.00 $81.00

SAE AMS4532G

SAE AMS4532G

Copper-Beryllium Alloy, Sheet and Strip, 98Cu 1.9Be, Half Hard (TD02)..

$41.00 $81.00