• IEEE 383-2015

IEEE 383-2015

  • IEEE Standard for Qualifying Electric Cables and Splices for Nuclear Facilities
  • standard by IEEE, 10/05/2015
  • Category: IEEE

$51.00 $26.00

Revision Standard - Active.General requirements and methods for qualifying electric cables and splices for nuclear facilities are provided. Cable, wire, and splices within or integral to other devices (e.g., instruments, panels, motors) should be qualified using the requirements in the applicable device standard or IEEE Std 323(TM). However, this standarda??s requirements may be applied to the cable, wire and splices within these devices. For qualification of fiber optic cable, refer to IEEE Std 1682(TM).
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1432_201005

SAE J1432_201005

Rear High Mounted Stop Lamps and Rear High Mounted Turn Signal Lamps for Use on Vehicles 2032 mm or ..

$41.00 $81.00

SAE J2909_201005

SAE J2909_201005

Light Vehicle Dry Stopping Distance..

$41.00 $81.00

SAE AS50861_A2

SAE AS50861_A2

Wire, Electric, Polyvinyl Chloride Insulated, Copper Or Copper Alloy..

$41.00 $81.00

SAE J1513_201005

SAE J1513_201005

External Automatic Slack Adjuster Performance Requirements..

$41.00 $81.00