• IEEE 45-1983

IEEE 45-1983

  • IEEE Recommended Practice for Electrical Installations on Shipboard
  • standard by IEEE, 04/25/1983
  • Category: IEEE

$185.00 $93.00

Revision Standard - Superseded.These marine recommendations are intended to serve as a guide for the selection and installation of equipment on merchant vessels with electric apparatus for lighting, signaling, communication, power, and propulsion. The recommendations define what are considered good present-day engineering practices with reference to the safety of the personnel and of the ship itself as well as reliability and durability of the apparatus. It is recognized that changes and improvements in shipboard requirements may develop which are not specifically covered herein; such changes, if incorporated in the design, should be equal to the safety and reliability levels defined herein and generally in accord with the text of these standards. Specific IEEE standards are referenced in the text. Other IEEE standards should be followed to the extent applicable. Attention is directed to the fact that regulations for electric installations on shipboard are promulgated by Governmental Regulatory Agencies, the Intergovernmental Maritime Consultative Organization, and Classification Societies. Such regulations have been given due consideration in these recommendations, but they are areas where differences are expressed. Reference should always be made to those regulations which may be applicable to the design.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5930A

SAE AMS5930A

Steel, Corrosion-Resistant, Bars and Forgings 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C) ..

$41.00 $81.00

SAE AMS2431C

SAE AMS2431C

Peening Media General Requirements..

$41.00 $81.00

SAE AMS2417H

SAE AMS2417H

Plating, Zinc-Nickel Alloy..

$41.00 $81.00

SAE AMS2642D

SAE AMS2642D

Structural Examination of Titanium Alloys, Etch-Anodize Inspection Procedure..

$41.00 $81.00