• IEEE C57.131-2012

IEEE C57.131-2012

  • IEEE Standard Requirements for Tap Changers
  • standard by IEEE, 05/04/2012
  • Category: IEEE

$141.00 $71.00

Revision Standard - Active.This standard covers electrical and mechanical performance and test requirements for tap changers installed in voltage regulating power and distribution transformers of all voltage and kVA ratings. It covers load tap changers (LTCs), also known as on-load tap changers (OLTCs), which can change taps while the transformer is energized and carrying load; and it covers de-energized tap changers (DETCs), also known as off-circuit tap changers, which may be operated only while the transformer is not energized. For load tap changers, this standard covers both resistor and reactor types. It also covers certain aspects of the attendant tap changer motor-drive mechanism. It does not cover the tap changer control system (manual or automatic).
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5935

SAE AMS5935

Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 10Ni - 2Mo - 0.9Al - 0.3Ti Vacuum Induct..

$41.00 $81.00

SAE AMS5928

SAE AMS5928

Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 9Ni - 2Mo - 0.7Al - 0.3Ti Vacuum Inducti..

$41.00 $81.00

SAE AMS5926

SAE AMS5926

Steel, Corrosion-Resistant, Bars, Wire, Tubing, and Forgings 15.5Cr ¿¿¿ 1.5Si ¿¿¿ 0.3Mo ¿¿¿ 0.1N (0...

$41.00 $81.00

SAE AMS4625H

SAE AMS4625H

Phosphor Bronze Bars, Rods, and Tubing 95Cu - 5Sn Hard Temper..

$41.00 $81.00