• IEEE N42.14-1991

IEEE N42.14-1991

  • American National Standard Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of Rad
  • standard by IEEE, 10/30/1991
  • Category: IEEE

$91.00 $46.00

New IEEE Standard - Active.Methods for the calibration and use of germanium spectrometers for the measurement of gamma-ray energies and emission rates over the energy range from 59 keV to approximately 3000 keV and for the calculation of source activities from these measurements are established. Minimum requirements for automated peak finding are stated. Methods for measuring the full-energy peak efficiency with calibrated sources are given. Performance tests that ascertain the proper functioning of the Ge spectrometer and evaluate the limitations of the algorithms used for locating and fitting single and multiple peaks are described. Methods for the measurement of and the correction for pulse pileup are suggested. Techniques are recommended for the inspection of spectral-analysis results for large errors resulting from summing of cascade gamma rays in the detector. Suggestions are provided for the establishment of data libraries for radionuclide identification, decay corrections, and the conversion of gamma-ray rates to decay rates
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5356C

SAE AMS5356C

Steel, Corrosion Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipita..

$41.00 $81.00

SAE AMS5581F

SAE AMS5581F

Nickel Alloy, Corrosion and Heat-Resistant, Seamless or Welded Tubing 62Ni - 21.5Cr - 9.0Mo - 3.7Cb ..

$41.00 $81.00

SAE AMS5588G

SAE AMS5588G

Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18..

$41.00 $81.00

SAE AMS5832G

SAE AMS5832G

Nickel Alloy, Corrosion and Heat Resistant, Welding Wire, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti..

$41.00 $81.00