ISA TR75.25.02-2000 (R2010)
- Control Valve Response Measurement from Step Inputs
- standard by The International Society of Automation, 01/01/2000
- Category: ISA
$164.00
$82.00
- This technical report applies to throttling control valves in closed loop control applications. The concepthas some application to open loop control applications. It does not address control valves used in on-offcontrol service. The "control valve" in the context of this document includes the following components:
- Valve: A valve is a device used for the control of fluid flow. It consists of a fluid containing valve bodyassembly, one or more ports between connection openings and a moveable closure member, whichopens, restricts or closes the port(s) (see ANSI/ISA-75.05.01-2000, "Control Valve Terminology").
- Actuator: An actuator is a device that supplies the force and causes the movement of the valve closuremember. Commonly these are fluid or electrically powered (see ANSI/ISA-75.05.01-2000). Actuators oftenuse air but other types use electric, hydraulic and electro-hydraulic power.
- Motion conversion mechanism: A mechanism installed between the valve and the power unit of theactuator to convert between linear and rotary motion where required. The conversion may be from linearactuator action to rotary valve operation or from rotary actuator action to linear valve operation.
- Accessories: Additional devices used in the operation of the control valve. As described inANSI/ISA-75.05.01-2000, typical examples include a positioner, transducer, signal booster relay, air set,snubber, etc.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
