MSS SP-72-2010
- Ball Valves with Flanged or Butt-Welding Ends for General Service
- standard by Manufacturers Standardization Society, 01/01/2010
- Category: MSS
$175.00
$88.00
1. SCOPE
1.1 This Standard Practice covers flanged or butt-weld end ball valves having in general, but not restricted to, round openings which may be full port, regular port, or reduced port types. The following characteristics shall be considered standard practice unless otherwise specified by agreement between manufacturer and purchaser.
1.2 Valves covered by this Standard Practice are suitable for use in general liquid and gas service.Their service pressures and temperatures generally conform to standards cited in Paragraph 2, but maybe restricted by the materials used for their seats and seals, or by other special considerations.
1.3 The size range covered by this Standard Practice is NPS ½ (DN 15) through NPS 36 (DN 900).
1.4 This Standard Practice covers ball valves of the following materials:
Carbon Steel
Alloy Steels
Stainless Steels
Ductile Iron
Gray Iron
Copper Alloy
1.5 Names of common valve body types are given in Figure 1. When variations or other body types are used, they may be named by the manufacturer. the names of basic valve parts are given in Figure 2. Other parts may be named by the manufacturer. Body types and valve parts may also be identified by applicable MSS or other terminology standards.
1.1 This Standard Practice covers flanged or butt-weld end ball valves having in general, but not restricted to, round openings which may be full port, regular port, or reduced port types. The following characteristics shall be considered standard practice unless otherwise specified by agreement between manufacturer and purchaser.
1.2 Valves covered by this Standard Practice are suitable for use in general liquid and gas service.Their service pressures and temperatures generally conform to standards cited in Paragraph 2, but maybe restricted by the materials used for their seats and seals, or by other special considerations.
1.3 The size range covered by this Standard Practice is NPS ½ (DN 15) through NPS 36 (DN 900).
1.4 This Standard Practice covers ball valves of the following materials:
Carbon Steel
Alloy Steels
Stainless Steels
Ductile Iron
Gray Iron
Copper Alloy
1.5 Names of common valve body types are given in Figure 1. When variations or other body types are used, they may be named by the manufacturer. the names of basic valve parts are given in Figure 2. Other parts may be named by the manufacturer. Body types and valve parts may also be identified by applicable MSS or other terminology standards.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
