MSS SP-75-2004
- Specification for High Test Wrought Butt Welding Fittings
- standard by Manufacturers Standardization Society, 01/01/2004
- Category: MSS
$80.00
$40.00
1. SCOPE
1.1 This specification covers factory-made, seamless and electric fusion-welded carbon and low-alloy steel, butt-welding fittings for use in high pressure gas and oil transmission and distribution systems, including pipelines, compressor stations, metering and regulating stations, and mains.
1.2 This Standard Practice governs dimensions, tolerances, ratings, testing, materials, chemical and tensile properties, heat treatment, notch toughness properties, manufacture and marking for high-test, butt-welding fittings NPS 60 and smaller. Dimensional requirements for NPS 14 and smaller are provided by reference to ASME B16.9.
1.3 The term "welding fittings" applies to butt-welding fittings such as elbows, segments of elbows, return bends, caps, tees, single- or multiple-outlet extruded headers, reducers, and factory-welded extensions and transition sections. (Lengths of extensions and transitions as agreed upon by purchaser and manufacturer.)
1.4 Fittings may be made to special dimensions, sizes, shapes, and tolerances, or of wrought materials other than those covered by this Sandard Practice by agreement between the manufacturer and the purchaser. When such fittings meet all other stipulations of this Sandard Practice they shall be considered as being in partial compliance therewith, providing they are appropriately marked.
1.4.1 Fittings manufactured in partial compliance, as provided in Section 1.4, shall be identified with "Part" following the respective grade designation.
1.1 This specification covers factory-made, seamless and electric fusion-welded carbon and low-alloy steel, butt-welding fittings for use in high pressure gas and oil transmission and distribution systems, including pipelines, compressor stations, metering and regulating stations, and mains.
1.2 This Standard Practice governs dimensions, tolerances, ratings, testing, materials, chemical and tensile properties, heat treatment, notch toughness properties, manufacture and marking for high-test, butt-welding fittings NPS 60 and smaller. Dimensional requirements for NPS 14 and smaller are provided by reference to ASME B16.9.
1.3 The term "welding fittings" applies to butt-welding fittings such as elbows, segments of elbows, return bends, caps, tees, single- or multiple-outlet extruded headers, reducers, and factory-welded extensions and transition sections. (Lengths of extensions and transitions as agreed upon by purchaser and manufacturer.)
1.4 Fittings may be made to special dimensions, sizes, shapes, and tolerances, or of wrought materials other than those covered by this Sandard Practice by agreement between the manufacturer and the purchaser. When such fittings meet all other stipulations of this Sandard Practice they shall be considered as being in partial compliance therewith, providing they are appropriately marked.
1.4.1 Fittings manufactured in partial compliance, as provided in Section 1.4, shall be identified with "Part" following the respective grade designation.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
