• NACE SP0815-2015

NACE SP0815-2015

  • Commercial Wet Abrasive Blast Cleaning - NACE WAB-3/SSPC-SP 6 (WAB)
  • standard by National Association of Corrosion Engineers, 03/14/2
  • Category: NACE

$59.00 $30.00

A WAB-cleaned surface is one prepared by combining water and abrasive in a blast cleaning operation by one of severalmethods, which include: 1) injection of water into the abrasive stream either internally or externally as the abrasive stream exitsthe blast nozzle; 2) injection of abrasive into pressurized water; or 3) use of an abrasive slurry under pressure to achieve thespecified WAB degree of cleanliness.
This standard defines the Commercial Wet Abrasive Blast Cleaning (NACE WAB-3/SSPC-SP 6 [WAB]) degree of visiblesurface cleanliness of uncoated or coated steel surfaces achieved by the use of wet abrasive blast cleaning. The requirementsinclude the end condition of the surface as determined by visual inspection, and materials and procedures used to achieve andverify the end condition.
This standard is limited to requirements for visible surface contaminants. Additional information on nonvisiblecontamination is provided in Paragraph A2 of Appendix A. Additional information on soluble salt testing is provided in SSPCGuide 15.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

NACE RP0199-04

NACE RP0199-04

Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy Roll-Bonded and Explosion-Bonded Cl..

$98.00 $195.00

NACE RP0296-2004

NACE RP0296-2004

Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure..

$85.00 $170.00

NACE RP0274-2004

NACE RP0274-2004

Standard Recommended Practice High-Voltage Electrical Inspection of Pipeline Coatings..

$91.00 $182.00

NACE RP0288-94 (R2004)

NACE RP0288-94 (R2004)

Standard Recommended Practice - Inspection of Linings on Steel and Concrete..

$90.00 $179.00