NSF 244-2018a
- Supplemental Microbiological Water Treatment Systems - Filtration
- standard by NSF International, 11/01/2018
- Category: NSF
$165.00
$83.00
1.1 Purpose
It is the purpose of this Standard to establish minimum requirements for the reduction of microorganisms using mechanical filtration devices for supplemental treatment of microbiologically safe drinking water. Mechanical filtration devices covered by this Standard are intended for use only on water supplies that have been treated to public water system standards or otherwise are determined to be microbiologically safe as demonstrated by routine testing. They are intended only for protection against intermittent incursions or accidental microbiological contamination of otherwise safe drinking water. This Standard also specifies the minimum product literature and labeling information that a manufacturer shall supply to authorized representatives and system owners as well as the minimum service related obligations that the manufacturer shall extend to system owners.
1.2 Scope
The point-of-use (POU) and point-of-entry (POE) systems addressed by this Standard are designed to be used for the supplemental microbial control of specific organisms that may occasionally be present in drinking water (public or private) because of intermittent incursions. Certain of these specific organisms that may be introduced into the drinking water are considered established or potential health hazards. This Standard establishes requirements for POU and POE drinking water treatment systems, and the materials and components used in these systems.
It is the purpose of this Standard to establish minimum requirements for the reduction of microorganisms using mechanical filtration devices for supplemental treatment of microbiologically safe drinking water. Mechanical filtration devices covered by this Standard are intended for use only on water supplies that have been treated to public water system standards or otherwise are determined to be microbiologically safe as demonstrated by routine testing. They are intended only for protection against intermittent incursions or accidental microbiological contamination of otherwise safe drinking water. This Standard also specifies the minimum product literature and labeling information that a manufacturer shall supply to authorized representatives and system owners as well as the minimum service related obligations that the manufacturer shall extend to system owners.
1.2 Scope
The point-of-use (POU) and point-of-entry (POE) systems addressed by this Standard are designed to be used for the supplemental microbial control of specific organisms that may occasionally be present in drinking water (public or private) because of intermittent incursions. Certain of these specific organisms that may be introduced into the drinking water are considered established or potential health hazards. This Standard establishes requirements for POU and POE drinking water treatment systems, and the materials and components used in these systems.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
