• NSF 358-1-2014

NSF 358-1-2014

  • Polyethylene Pipe and Fittings for Water-Based Ground-Source Geothermal Heat Pump Systems
  • standard by NSF International, 11/03/2014
  • Category: NSF

$160.00 $80.00

This Standard establishes the minimum physical and performance requirements for plastic piping system components. These criteria were established for the protection of property, public health and the environment.
The physical and performance requirements in this Standard apply to plastic piping system components as well as non-plastic components of the ground loop heat exchanger including, but not limited to, pipes and fittings used in water-based ground-source heat pump systems. This Standard is intended for ground loop heat exchangers with a maximum temperature and pressure of 140 °F (60 °C) at 100 psi. Water-based ground-source heat pump systems commonly include the use of anti-freeze, heat transfer fluids or other chemical additives. This Standard does not cover refrigerant based ground loop heat exchangers such as direct expansion (DX) systems. This Standard does not cover hydronic heating or cooling systems within buildings.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

ULC 378

ULC 378

Guide for the Investigation of Draft Equipment (ULC C378-1975)..

$56.00 $112.86

ULC S702.2-03

ULC S702.2-03

Mineral Fibre Thermal Insulation for Buildings, Part 2: Application Guidelines..

$88.00 $176.00

ULC 583 Draft

ULC 583 Draft

Guide for the Investigation of Electric Battery Powered Industrial Trucks (ULC ORD)..

$77.00 $154.00

ULC C407-1974

ULC C407-1974

Guide for the Investigation of High Pressure Gas Manifolds..

$67.00 $133.00