• NSF 401-2016

NSF 401-2016

  • Drinking Water Treatment Units - Emerging Compounds/Incidental Contaminants
  • standard by NSF International, 09/01/2016
  • Category: NSF

$165.00 $83.00

The point-of-use and point-of-entry systems addressed by this Standard are designed to be used for the reduction of specific substances that may be present in drinking water (public or private) considered to be microbiologically safe and of known quality. Systems covered under this Standard are intended to reduce substances that are at very low, yet measurable concentrations but not at definitive concentrations of known health concern. These substances may be soluble or particulate in nature but their presence, even at very low concentrations, may influence public acceptance/perception of the drinking water quality. The systems addressed by this Standard are not intended for reducing these specific substances at higher concentrations that may have a known acute or chronic health effect. It is recognized that a system may be effective in reducing one or more of the emerging compounds/incidental contaminants listed in this Standard. It is not necessary that a device be able to reduce all the Emerging Compounds/Incidental Contaminants listed in order to meet the requirements of this Standard. Systems with components or functions covered under other NSF or NSF/ANSI standards or criteria shall conform to the applicable requirements therein.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS1540D

SAE AMS1540D

Cleaner, Thrust Reverser Water-Base (Stabilized: Apr 2018)..

$41.00 $81.00

SAE AMS4123K

SAE AMS4123K

Aluminum Alloy, Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Tr..

$41.00 $81.00

SAE AMS4255D

SAE AMS4255D

Aluminum Alloy, Clad One Side Sheet 0.6Mg - 0.35Si - 0.28Cu (No. 21 Brazing Sheet) As Fabricated..

$41.00 $81.00

SAE AMS4340G

SAE AMS4340G

Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T76511) Solution Heat Treated, Stres..

$41.00 $81.00