• NSF 46-2010

NSF 46-2010

  • Evaluation of components and devices used in wastewater treatment systems
  • standard by NSF International, 04/14/2010
  • Category: NSF

$160.00 $80.00

The purpose of this Standard is to establish minimum materials, design and construction, and performancerequirements for components and devices used in the handling, treating, recycling, reusing, or disposal ofwastewater. This Standard is intended to protect public health and the environment as well as to minimizenuisance factors.
This Standard is intended for use with components and devices not covered by other NSF wastewaterstandards. Components and devices covered by this Standard are intended for use with greywater orblackwater or both. Management methods for the end-products of these components and devices are notaddressed in this Standard. This Standard shall in no way restrict new system designs, provided that suchdesigns meet the minimum specifications described herein.
All devices and components meeting the scope of this Standard shall comply with all of the requirementsdescribed in 1 through 8. In addition, devices and components shall comply with the applicable subsequentsection(s) contained in this Standard. Where subsequent sections of the Standard include requirements thatoverlap with those found in 1 through 8, the requirements of both sections shall be met unless otherwisespecified in the requirements of the subsequent section.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4286F

SAE AMS4286F

Aluminum Alloy Castings, Permanent Mold 7.0Si - 0.32Mg (356.0-T51) As-Cast then Precipitation Heat T..

$41.00 $81.00

SAE AS3403A

SAE AS3403A

BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, AMS5708 (UNS N07001), .3750-24 UNJF-3A..

$41.00 $81.00

SAE AMS4508H

SAE AMS4508H

Copper-Zinc Alloy, Laminated Sheet 70Cu - 30Zn Surface Bonded..

$41.00 $81.00

SAE J1819_201503

SAE J1819_201503

Securing Child Restraint Systems in Motor Vehicles..

$41.00 $81.00