• NSF 53-2001

NSF 53-2001

  • Drinking Water Treatment Units-Health Effects
  • standard by NSF International,
  • Category: NSF

$220.00 $110.00


Purpose: It is the purpose of this Standard to establish minimum requirements for materials, design and construction, and performance of point-of-use and point-of-entry drinking water treatment systems that are designed to reduce specific health-related contaminants in public or private water supplies. This includes point-of-entry drinking water treatment systems used to treat all or part of the water at the inlet to a residential facility or a bottled water production facility and the material and components used in these systems. This Standard also specifies the minimum product literature and labeling information that a manufacturer shall supply to authorized representatives and system owners as well as the minimum service-related obligations that the manufacturer shall extend to system owners.
Scope: The point-of-use and point-of-entry systems addressed by this Standard are designed to be used for the reduction of specific substances that may be present in drinking water (public or private). These substances are considered established or potential health hazards. They may be microbiological, chemical, or particulate (including filterable cysts) in nature. It is recognized that a system may be effective in controlling one or more of these contaminants, but it is not required to control all. Activated carbon filter systems covered by this Standard are not intended to be used with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4955G

SAE AMS4955G

Titanium Alloy, Welding Wire 8Al - 1Mo - 1V..

$41.00 $81.00

SAE AMS5027F

SAE AMS5027F

Steel, Welding Wire 1.05Cr - 0.55Ni - 1.0Mo - 0.08V (0.26 – 0.32C) Vacuum Melted, Environment-Cont..

$41.00 $81.00

SAE AMS5046D

SAE AMS5046D

Carbon Steel, Sheet, Strip, and Plate (SAE 1020 and 1025) Annealed..

$41.00 $81.00

SAE AMS5553G

SAE AMS5553G

Nickel, Sheet and Strip Low (0.02 max) Carbon Annealed..

$41.00 $81.00