• SAE AIR1108

SAE AIR1108

  • Groove Design - Metal Face Seal
  • standard by SAE International, 10/28/2013
  • Category: SAE

$81.00 $41.00

Groove designs presented herein are applicable for use with machined or formed metal seals which are similar in configuration to those shown in figure 3, which operate under internal pressure or in vacuum service and which have been specifically qualified or recommended by the purchaser or the manufacturer for use with this AIR. They are also applicable for use with metal o-rings (e.g., MS9142 MS9202 thru MS9205) where interchangeability with machined or formed metal seals is desired. For metal o-ring groove designs where interchangeability is not a requirement refer to ARP674.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1128_201310

SAE J1128_201310

Low Voltage Primary Cable..

$41.00 $81.00

SAE AMS6360M

SAE AMS6360M

Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Stress Relieved..

$41.00 $81.00

SAE ARP1315E

SAE ARP1315E

Safety Considerations for Airplane Lavatories..

$41.00 $81.00

SAE AS85352/1A

SAE AS85352/1A

INFLATOR ASSEMBLY KIT (Stabilized: Oct 2013)..

$41.00 $81.00