• SAE AIR4827A

SAE AIR4827A

  • Modeling Techniques for Jet Engine Test Cell Aerodynamics
  • standard by SAE International, 06/16/2009
  • Category: SAE

$81.00 $41.00

Research studies focusing on jet engine test cell aerodynamics, acoustics, and cell flow characteristics as affecting engine performance can be conducted with scale models for a variety of test cells. Such studies require the simulation of a number of jet engines in rather accurate detail, both as to geometry and as to flow characteristics. It has been demonstrated that simulators of low-bypass afterburning turbojets, high-bypass turbofans, turboshaft engines (without propellers), and unducted fan engines can be designed, fabricated, and successfully operated using either high-pressure air ejector systems or turbine driven systems for the motive power. Specific components of a test cell such as inlets or exhaust sections alone may be tested independently by employing a vacuum source and bellmouth to simulate engine inlet flow or compressed air and scaled nozzle to simulate engine exhaust flow. The peculiar problems associated with scale model testing and engine simulators and the methods which can be used to attack these problems are described.

This SAE Aerospace Information Report (AIR) has been written for individuals associated with ground level testing of turbofan and turbojet engines and particularly for those who might be interested in investigating the performance characteristics of a new test cell design or of proposed modifications to an existing test cell by means of a scale model test.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS03_2A

SAE AMS03_2A

Cleaning and Preparation of Metal Surfaces (Stabilized: Mar 2017)..

$41.00 $81.00

SAE AMS03_3A

SAE AMS03_3A

Protection of Aluminum Alloys by Sprayed Metal Coatings (Stabilized: Mar 2017)..

$41.00 $81.00

SAE AMS03_4A

SAE AMS03_4A

The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450..

$41.00 $81.00

SAE AS15531A

SAE AS15531A

Digital Time Division Command/Response Multiplex Data Bus (Stabilized: Mar 2017)..

$41.00 $81.00