• SAE AIR5784

SAE AIR5784

  • A Review of Literature on the Relationship Between Gas Turbine Engine Lubricants and Aircraft Cabin Air Quality
  • standard by SAE International, 09/12/2016
  • Category: SAE

$81.00 $41.00

There has been a recent upsurge in interest from the media concerning the quality of the environment within aircraft cabins and cockpits especially in the commercial world 1-4 . This has included (although by no means been limited to) the air quality, with particular reference to the alleged effects ofcontamination from the aircraft turbine lubricant. Possible exposure to 'organophosphates' (OPs) from the oil has raised special concerns from cabin crew.

Such is the concern that government organisations around the world, including Australia, USA and UK, have set up committees to investigate the cabin air quality issue. Concern was also voiced in the aviation lubricants world at the way in which OP additives in turbine lubricants were being blamed in some reports for the symptoms being experienced by air crew and passengers. SAE Committee E-34 therefore decided that it should gather as much available information on the subject as possible. This would then enable E-34 to participate in debates on the issue and help prevent a potentially erroneous decision regarding the future of OP based additives in turbine lubricants. It would also serve as an indicator of where any additional work may be necessary to properly gauge the role that turbine lubricants, and OP additives, play in cabin air quality.

This report summarises recent documentation from the literature on this subject. The contents do not necessarily represent the views of the SAE or any of the members of the study group who produced this review.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5812G

SAE AMS5812G

Steel, Corrosion and Heat Resistant, Welding Wire 15Cr - 7.1Ni - 2.4Mo - 1.0Al Vacuum Induction Melt..

$41.00 $81.00

SAE AMS2759/3F

SAE AMS2759/3F

Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts..

$41.00 $81.00

SAE AMS3092A

SAE AMS3092A

Release Agent, for Use During Form-In-Place Gasket Preparation..

$41.00 $81.00

SAE AMS3265E

SAE AMS3265E

Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting For Int..

$41.00 $81.00