• SAE AMS1424J

SAE AMS1424J

  • Deicing/Anti-Icing Fluid, Aircraft, SAE Type 1
  • standard by SAE International, 12/29/2009
  • Category: SAE

$81.00 $41.00

This specification covers a deicing/anti-icing material in the form of a fluid.

The fluid is generally used heated either diluted with water, or as supplied, for the removal of, and time-limited protection against, deposits of frost, ice, and snow on exterior aircraft surfaces prior to takeoff.

Consult aircraft manufacturer's maintenance manual and service letters to determine any restrictions relating to the use of deicing/anti-icing fluids for type and model of aircraft being treated. Refer also to SAE ARP 4737.

The manufacturer shall determine and report the lowest operational use temperature (LOUT) for the recommended dilutions of their fluid(s).

The LOUT for an SAE Type I fluid is the lowest temperature at which the fluid has been tested and certified in accordance with the appropriate aerodynamic acceptance tests (3.5.3) while maintaining the 10 \mDC (18 \mDF) freezing point buffer (see SAE ARP 4737).
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4247C

SAE AMS4247C

Aluminum Alloy, Hand Forgings 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T7352) Solution Heat Treated, Str..

$41.00 $81.00

SAE AMS4373

SAE AMS4373

Aluminum Alloy, Rolled, Drawn or Cold Finished Bar, Rod, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (..

$41.00 $81.00

SAE AMS4898E

SAE AMS4898E

Titanium Alloy, Sheet 6Al - 2Sn - 2Zr - 2Mo - 2Cr - 0.15Si Annealed..

$41.00 $81.00

SAE AMS4902L

SAE AMS4902L

Titanium Sheet, Strip, and Plate Commercially Pure Annealed 40.0 ksi (276 MPa) Yield Strength..

$41.00 $81.00