• SAE AMS2375D

SAE AMS2375D

  • Control of Forgings Requiring First Article Approval
  • standard by SAE International, 04/09/2012
  • Category: SAE

$81.00 $41.00

This specification covers procedures for obtaining first-article (preproduction) approval of forgings and the controls to be exercised in producing subsequent production forgings.

This procedure has been used typically for forgings which require preproduction approval and where assurance is required that production lots are of essentially the same metallurgical quality and are produced by the same basic procedures as the forging originally qualified.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4117K

SAE AMS4117K

Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire and Flash Welded Rings 1.0Mg - 0.60Si -..

$41.00 $81.00

SAE AMS4901T

SAE AMS4901T

Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa)..

$41.00 $81.00

SAE AMS3797/11C

SAE AMS3797/11C

Webbing, Nylon, Integral Locking Slots 1-1/8 (29) Wide, 11,000 (48,930) Breaking Strength (Stabilize..

$41.00 $81.00

SAE AMS3797/12C

SAE AMS3797/12C

Webbing, Nylon, Integral Locking Slots 1-1/8 (29) Wide, 12,000 (53,379) Breaking Strength (Stabilize..

$41.00 $81.00