• SAE AMS2401H

SAE AMS2401H

  • Plating, Cadmium, Low Hydrogen Content Deposit
  • standard by SAE International, 11/20/2007
  • Category: SAE

$81.00 $41.00

This specification covers the engineering requirements for cadmium deposited on ferrous metals.

This process has been used typically to provide corrosion resistance to steel parts heat treated to tensile strength of 180 ksi (1240 MPa) and higher and used at temperatures not higher than 450 \mDF (232 \mDC).
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4172F

SAE AMS4172F

Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4511 or T4510) Solution Heat Trea..

$41.00 $81.00

SAE AMS4173F

SAE AMS4173F

Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511 or T6510) Solution Heat Trea..

$41.00 $81.00

SAE AMSH7199A

SAE AMSH7199A

Heat Treatment of Wrought Copper-Beryllium Alloys, Process for (Copper Alloys: Numbers C17000, C1720..

$41.00 $81.00

SAE AMS5738D

SAE AMS5738D

Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9Ni (SAE 30303F) Free Machining, High Yield Strengt..

$41.00 $81.00