• SAE AMS2435G

SAE AMS2435G

  • Coating, Tungsten Carbide-Cobalt Coating, Detonation Process
  • standard by SAE International, 08/17/2012
  • Category: SAE

$81.00 $41.00

This specification has been declared NONCURRENT by the Aerospace Materials Division, SAE, as of June, 2007. It is recommended, therefore, that this specification not be specified for new designs. NONCURRENT refers to those specifications which have previously been widely used and which may be required on some existing designs in the future. The Aerospace Materials Division, however, does not recommend these specifications for future use in new designs.

This specification covers the engineering requirements for applying tungsten carbide/cobalt coatings to metal parts by the detonation process and the properties of such coatings.

This coating has been used typically to provide a hard, wear resistant surface on metal parts which do not operate in service higher than 1000 \mDF (538 \mDC) but usage is not limited to such applications. These coatings are not recommended for surfaces with deep vee-shaped grooves, blind cavities, narrow holes or sharp corners, or where deformation of the base metal may be expected. Higher cobalt content provides increased ductility for applications where impact or fretting wear is involved.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2552_200903

SAE J2552_200903

Push-On Hose and Mating Hose Fittings..

$41.00 $81.00

SAE J1326_200903

SAE J1326_200903

Test Method for Measuring Wet Color Transfer Characteristics..

$41.00 $81.00

SAE J2876_200903

SAE J2876_200903

Low Speed Knee Slider Test Procedure for the Hybrid III 50th Male Dummy..

$41.00 $81.00

SAE J2370_200903

SAE J2370_200903

Geometric Dimensions and Tolerancing for Curved Hose..

$41.00 $81.00