• SAE AMS2435H

SAE AMS2435H

  • Coating, Tungsten Carbide-Cobalt Coating, Detonation Process (Stabilized: Sep 2017)
  • standard by SAE International, 09/20/2017
  • Category: SAE

$81.00 $41.00

This specification covers the engineering requirements for applying tungsten carbide/cobalt coatings to metal parts by the detonation process and the properties of such coatings.

This coating has been used typically to provide a hard, wear resistant surface on metal parts which do not operate in service higher than 1000 degrees F (538 degrees C) but usage is not limited to such applications. These coatings are not recommended for surfaces with deep vee-shaped grooves, blind cavities, narrow holes or sharp corners, or where deformation of the base metal may be expected. Higher cobalt content provides increased ductility for applications where impact or fretting wear is involved.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2603_200710

SAE J2603_200710

Recommended Practice for Powered Gas Brake Control Systems..

$41.00 $81.00

SAE J2604_200710

SAE J2604_200710

Recommended Test Procedure for Powered Gas Brake Control Systems..

$41.00 $81.00

SAE J915_200710

SAE J915_200710

Automatic Transmissions—Manual Control Sequence..

$41.00 $81.00

SAE J1236_200710

SAE J1236_200710

Cast Iron Sealing Rings (Metric)..

$41.00 $81.00