• SAE AMS2440B

SAE AMS2440B

  • Inspection of Ground, Chromium Plated Steel Parts
  • standard by SAE International, 07/18/2013
  • Category: SAE

$81.00 $41.00

This specification covers the requirements, procedures, and accept/reject criteria for inspecting ground chromium plated surfaces for grinder-induced damage to the chromium plate and substructure. The apecification also provides users with criteria for distinguishing between such damage and acceptable indications inherent to the chromium plate.

This procedure is used for nondestructive testing of heat treated, high strength, (180 ksi (1240 MPa) or higher tensile strength), low-alloy steel parts which have ben chromium plated and subsequently ground, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5608F

SAE AMS5608F

Cobalt Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 40Co - 22Cr - 22Ni - 14.5W - 0.0..

$41.00 $81.00

SAE AMS6946B

SAE AMS6946B

Titanium Alloy, Sheet, Strip, and Plate 4Al - 2.5V - 1.5Fe, Annealed..

$41.00 $81.00

SAE J1319_201008

SAE J1319_201008

Rear Fog Lamp Systems..

$41.00 $81.00

SAE AMS3726D

SAE AMS3726D

Shims, Filled Resin Compound..

$41.00 $81.00