• SAE AMS2451/13

SAE AMS2451/13

  • Plating, Brush, Silver
  • standard by SAE International, 04/19/2011
  • Category: SAE

$81.00 $41.00

This specification covers the engineering requirements and process for brush plating of silver by electrodeposition. It shall be used, in conjunction with AMS 2451, for silver deposits.

This process has been used typically to provide low electrical contact resistance, prevent galling or seizing of surfaces of parts, and corrosion protection, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5928

SAE AMS5928

Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 9Ni - 2Mo - 0.7Al - 0.3Ti Vacuum Inducti..

$41.00 $81.00

SAE AMS5926

SAE AMS5926

Steel, Corrosion-Resistant, Bars, Wire, Tubing, and Forgings 15.5Cr ¿¿¿ 1.5Si ¿¿¿ 0.3Mo ¿¿¿ 0.1N (0...

$41.00 $81.00

SAE AMS4625H

SAE AMS4625H

Phosphor Bronze Bars, Rods, and Tubing 95Cu - 5Sn Hard Temper..

$41.00 $81.00

SAE AMS4970K

SAE AMS4970K

Titanium Alloy Bars, Wire, and Forgings 7Al - 4Mo Solution and Precipitation Heat Treated..

$41.00 $81.00