• SAE AMS2451/6A

SAE AMS2451/6A

  • Plating, Brush, Copper General Purpose
  • standard by SAE International, 04/19/2011
  • Category: SAE

$81.00 $41.00

This specification establishes the engineering requirements and process controls for brush plating of copper by electrodeposition. It should be used, in conjunction with AMS 2451, for general purpose copper deposits.

This process is used typically to repair damaged, worn, or mismachined parts and as a stop-off in carburizing and nitriding but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5842G

SAE AMS5842G

Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2..

$41.00 $81.00

SAE AMS5843G

SAE AMS5843G

Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2..

$41.00 $81.00

SAE AMS6386D

SAE AMS6386D

Steel Sheet and Plate Low Alloy, Heat Treated 90,000 psi (621 MPa) and 100,000 psi (690 MPa) Yield S..

$41.00 $81.00

SAE AS39029/118

SAE AS39029/118

CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, ENGINE APPLICATION (FOR MIL-DTL-38999 SERIES I..

$41.00 $81.00