• SAE AMS2453

SAE AMS2453

  • Low Stress Grinding of Steel Parts Heat Treated to 180 ksi or Over, and Low Stress Grinding of Chrome Plating Applied to Steel P
  • standard by SAE International, 11/10/2015
  • Category: SAE

$81.00 $41.00

The purpose of this specification is to establish requirements of a grinding method and to provide grinding parameters that will eliminate or minimize overheating, cracking, high residual tensile stresses, and/or other metallurgical changes that decrease structural integrity of steel parts or chrome plated steel parts. This standard establishes requirements for low stress grinding of martensitic high strength steel heat-treated to 180 ksi (1241 MPa) minimum ultimate tensile strength (UTS) and above, and requirements for low stress grinding of chromium plating applied to such high strength steel.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5636F

SAE AMS5636F

Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Dr..

$41.00 $81.00

SAE AMS5624E

SAE AMS5624E

Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished..

$41.00 $81.00

SAE AMS5586G

SAE AMS5586G

Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1..

$41.00 $81.00

SAE AMS5635F

SAE AMS5635F

Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9Ni - 0.21Pb (303Pb) Free-Machining, Sol..

$41.00 $81.00