• SAE AMS2465C

SAE AMS2465C

  • Disilicide Diffusion Coating of Molybdenum and Molybdenum Alloys Pack Cementation Method
  • standard by SAE International, 10/03/2011
  • Category: SAE

$81.00 $41.00

This specification has been declared “NONCURRENT” by the Aerospace Materials Division, SAE, as of February, 2005. It is recommended, therefore, that this specification not be specified for new designs. The process is no longer available and there are no suggested substitutes for this document. “NONCURRENT” refers to those specifications which have previously been widely used and which may be required on some existing designs in the future. The Aerospace Materials Division, however, does not recommend these specifications for future use in new designs.

Primarily to provide protection against oxidation above 1100 \mDF (595 \mDC) and for operation in oxidizing atmospheres to approximately 3000 \mDF (1650 \mDC) for limited duration.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS4282

SAE AS4282

CAP ASSEMBLY, PROTECTIVE CLOSURE, BEAM SEAL FITTING, LOW PRESSURE..

$41.00 $81.00

SAE AS4302

SAE AS4302

TEE ASSEMBLY, FLARED TUBE, RETAINED NUT ON RUN, FOR SEAL RING..

$41.00 $81.00

SAE AS4303

SAE AS4303

ELBOW ASSEMBLY 90¿¿, FLARED TUBE TO ADJUSTABLE END, FOR SEAL RING..

$41.00 $81.00

SAE AS4304

SAE AS4304

TEE ASSEMBLY, FLARED TUBE, RETAINED NUT ON SIDE, FOR SEAL RING..

$41.00 $81.00