• SAE AMS2515G

SAE AMS2515G

  • Polytetrafluoroethylene (PTFE) Resin Coating Low Build, 370 to 400 ¿¿C (698 to 752 ¿¿F) Fusion
  • standard by SAE International, 01/25/2013
  • Category: SAE

$81.00 $41.00

This specification establishes the engineering requirements for producing thin coatings of polytetrafluoroethylene (PTFE) resin on parts and the properties of such coatings. Primarily to provide dry lubrication, high heat stability, and corrosion protection on parts which operate at not higher than 275 \mDC (527 \mDF) for limited periods or not higher than 245 \mDC (473 \mDC) for extended periods. This coating may also be used as a release film for molds.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS6356G

SAE AMS6356G

Steel, Sheet, Strip, and Plate, 0.95Cr - 0.20Mo - (0.30 - 0.35C) (4132)..

$41.00 $81.00

SAE AMS6357K

SAE AMS6357K

Steel Sheet, Strip, and Plate, 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735)..

$41.00 $81.00

SAE AMS6370N

SAE AMS6370N

Steel, Bars, Forgings, and Rings, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)..

$41.00 $81.00

SAE J1490_201105

SAE J1490_201105

Measurement and Presentation of Truck Ride Vibrations (Stabilized: May 2011)..

$41.00 $81.00