• SAE AMS2546

SAE AMS2546

  • Laser Peening
  • standard by SAE International, 05/17/2010
  • Category: SAE

$81.00 $41.00

This specification covers the requirements for computer controlled laser peening of metal part surfaces to induce residual compressive stresses at and beneath the surface.

Laser peening is utilized to induce compressive residual stresses at and beneath the surface of metal parts to depths of 0.040? to 0.080? (1 to 2 mm) depending on the metal properties and the laser peening processing parameters. These residual stresses can provide improved fatigue life and stress corrosion resistance, although usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5410C

SAE AMS5410C

Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 61Ni - 16Cr - 8.5Co - 1.8Mo - 2.6W -..

$41.00 $81.00

SAE AS18280F

SAE AS18280F

Fittings, 24 degree Cone Flareless, Fluid Connection, 3000 psi..

$41.00 $81.00

SAE AIR6202

SAE AIR6202

Test Cell Mass Fuel Flow Measurement Using Coriolis Flow Meters..

$41.00 $81.00

SAE AMS4084E

SAE AMS4084E

Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T61) Solution and Precipitation Heat Treat..

$41.00 $81.00