• SAE AMS2580A

SAE AMS2580A

  • Shot Peening, Ultrasonically Activated
  • standard by SAE International, 06/11/2013
  • Category: SAE

$81.00 $41.00

This specification covers the requirements for inducing compressive residual stresses on the surface of metal parts using ultrasonically activated shot peening.

Ultrasonically activated shot peening is typically used to induce compressive residual stresses on the surface layer of metallic parts to a depth up to 0.040 inch (1 mm). The shape and depth of the compressive residual stress distribution depend on the properties of the part and the ultrasonically activated shot peening process parameters. The residual stresses produced increase fatigue performance, resistance to stress-corrosion cracking, corrosion fatigue, and fretting fatigue, but its usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS7379

SAE AMS7379

Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg ¿¿¿40 ¿¿F (¿¿¿40 ..

$41.00 $81.00

SAE ARP4737H

SAE ARP4737H

Aircraft Deicing/Anti-icing Methods..

$41.00 $81.00

SAE AS8057

SAE AS8057

Minimum Design and Performance of Airplane Galley Insert Equipment, Electrical/Pressurized..

$41.00 $81.00

SAE AMS4730G

SAE AMS4730G

Nickel-Copper Alloy Wire, Corrosion-Resistant 67Ni - 31Cu Annealed (400)..

$41.00 $81.00