• SAE AMS2631D

SAE AMS2631D

  • Ultrasonic Inspection Titanium and Titanium Alloy Bar, Billet and Plate
  • standard by SAE International, 07/22/2011
  • Category: SAE

$81.00 $41.00

This specification covers the procedure for ultrasonic inspection of wrought titanium and titanium alloy products 0.25 inch (6.4 mm) and over in cross-sectional (thickness) or diameter.

When specifically requested by purchaser, this specification may be used for metals other than titanium.

This procedure has been used typically for locating internal defects, such as cracks, voids, spongy areas, and other structural discontinuities, which may or may not be exposed to the surface, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4460

SAE AMS4460

Aluminum Alloy, Clad Two Sides Sheet, 0.6Mg - 0.35Si - 0.28Cu (No. 24 Brazing Sheet), As Fabricated..

$41.00 $81.00

SAE AMS4465

SAE AMS4465

Aluminum Alloy, Clad One Side Sheet, 0.6Mg - 0.35Si - 0.28Cu (No. 23 Brazing Sheet), As Fabricated..

$41.00 $81.00

SAE AMS4914E

SAE AMS4914E

Titanium Alloy Cold Rolled Sheet and Strip, 15V - 3Al - 3Cr - 3Sn, Solution Heat Treated..

$41.00 $81.00

SAE AMS5894C

SAE AMS5894C

Cobalt Alloys, Bars, Sheet, and Plate, 60Co - 28Cr - 4.5W - 1.15C, Solution Heat Treated..

$41.00 $81.00