• SAE AMS2649C

SAE AMS2649C

  • Etch Inspection of High Strength Steel Parts
  • standard by SAE International, 01/03/2008
  • Category: SAE

$81.00 $41.00

This specification establishes the requirements for etch inspection of bare high-strength low-alloy steel parts having tensile strength of 180 ksi (1241 MPa) and higher and of carburized parts to detect overheating caused by abusive machining or grinding in the heat treated condition, and to detect localized discontinuous carburization. This process is not applicable to surface hardened steels produced by nitriding or carbonitriding. This process may remove 0.0001 to 0.0005 inch (2.5 to 12.7 micrometers) from the surface of the part.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4532H

SAE AMS4532H

Copper-Beryllium Alloy, Sheet and Strip 98Cu - 1.9Be Half Hard (TD02)..

$41.00 $81.00

SAE AS4893A

SAE AS4893A

Generic Open Architecture (GOA) Framework (Stabilized: Sep 2018)..

$41.00 $81.00

SAE J1098_201809

SAE J1098_201809

Tonne Kilometer Per Hour Application..

$41.00 $81.00

SAE AIR6133

SAE AIR6133

Design and Safety Criteria for Passenger Boarding Stairways..

$41.00 $81.00